Do you have a question about the Plastimo SX-350 and is the answer not in the manual?
Brand | Plastimo |
---|---|
Model | SX-350 |
Category | Marine Radio |
Language | English |
Hold down [PTT] to transmit, speak with normal tone; Release [PTT] to receive.
Press to enter menu mode; Hold for 1 second to set or clear the TAG channel.
While standby, press to select operation channel; While in the menu mode, press to select the menu items; While in channel scan, press to change the scan direction.
Press to select high or low output power; Hold for 1 second to turn Lock Function ON or OFF.
Hold down this key for 1 second to power ON/OFF the radio.
Press to select Channel 16; Hold for 1 second to select Call Channel.
Press to enter volume/squelch adjustment mode; Hold for 1 second to activate Monitor function.
Connect with 500 supplied antenna.
For connecting external earphone/microphone, AC Adaptor/DC Charger, or programming cable.
This radio contains USA, International and Canadian Channel Group. Switch via MENU and LOCK keys.
This radio has 10 weather channels. Switch between operating and weather channels via MENU and VOL/SQL keys.
Hold [C/16] key to select CALL Channel, then hold for 3 seconds to enter programming mode.
Set TAG (*) for channels to be scanned; cancel TAG for channels not needed. Untagged channels skipped.
Enter 'Scdu' menu to select Scan. Exit menu to start Normal or Priority Scan. 'SCAN' flashes on LCD.
Scan pauses on signal reception. Channel 16 monitored in priority scan. Press [▲]/[▼] to change scan direction.
Press [MENU], [PTT], [C/16], or [] to stop scanning.
Enter 'Scdu' menu to select Watch. Exit menu to start Dual Watch or Tri Watch. 'DUAL'/'TRI' flashes on LCD.
Watch and monitor in turns. 'BEEP' on signal. Tri Watch switches to Dual Watch on CALL Channel signal.
Press [MENU], [PTT], [C/16], or [] to stop watch and monitoring.
Press [MENU] to enter menu mode. Use [▲]/[▼] to select menu items or settings. Press [C/16] to exit.
Configure Beep Tone, Channel Group, Function Selection, Weather Alert, Priority Scan, Scan Resume Timer, Backlight, LCD Contrast, Channel Display, Auto Power Save, Monitor Function.