EasyManua.ls Logo

Plastimo SX-400 - Troubleshooting Common Issues

Plastimo SX-400
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION REF.
Cannot power on. • The battery is exhausted. • Charge the battery pack. • 1
Cannot transmit
or transmit in high
power is incapable.
Some channels are limited to low power
transmit.
• The battery is exhausted
• Low power transmit.
• Work in Weather Channel or Channel 70.
• Switch to channels without output power limit.
• Charge the battery pack.
• Press [Hi/Lo] to select high power transmit.
• Exit Weather Channel or Channel 70.
• 5, 6
• 1
• 5
• 6
Cannot not change
channel.
• The keypad is locked.
Hold [LOCK] for 1 second to turn off key lock
function.
• 7
Cannot scan. • No TAG channels are set. Set TAG channels. • 8
Cannot communi-
cate in the same
channel.
• The channel is duplex (DUP).
• Work in self-set channel group.
• Select channel.
• Set the same channel frequency.
• 6
• 6
No prompt tone. The prompt tone is turned o. • Turn on the prompt tone in the set mode. • 10
No sound from
loudspeaker.
• The squelch level is too high.
• The volume level is too low.
• Water ingress in loudspeaker.
• Set the proper squelch level.
• Turn up the volume.
• Drain water in loudspeaker.
• 5
• 5
• 7
Battery sign ashes
and indicates “ER
and “CHG”.
The temperature range for charging exceed
0~+45°C.
Continuing charging causes high battery
heat.
• Put the radio in somewhere cool. ---
Cannot charge full.
• Power on when charging.
• The inner battery service life is short.
• Power on and then charge again.
• Change inner battery from the local dealer.
• 1
4242
BEDIENUNGSANLEITUNG

Related product manuals