GEMORO PLATINUM PRO501VXP 10
wish to count and the PRO501VXP can easily
accommodate this. Once the scale is on and
it has stabilized, place the desired tray on the
weighing platform and press the TARE button
to zero the weight of the tray from its display.
Then press the PCS button as usual per the
above instruction and the scale will then begin its
counting function while using the tray as needed.
WARRANTY
This durable scale is warranted to perform to the
manufacturers stated specifications as noted above
and if the above referenced care is provided, for a
period not to exceed two (2) years from the original
date of purchase, providing the purchaser first follows
the warranty registration procedure. In the event
of the scale becoming defective within the stated
warranty period and it is determined by the factory
that no user abuse was the cause of the defect, the
scale may be repaired or replaced at the factory’s
sole discretion. No other written or implied warranty
shall apply. In the unlikely event of a scale defect
and providing the warranty registration procedure
has been followed; please return the defective
To Next Page
Loading...