3INSTRUCTION MANUAL
INSTRUCTIONS FOR USE
Before using the PRO501VXP, locate the leveling
bubble (positioned at the middle right side of the
scale); adjust the feet as needed by unscrewing in
order to make the scale level. The scale is now ready
to be turned on and used.
CONTROL PANEL 5 BUTTON ID
& EXPLANATION
1. POWER - Push this button once to turn the scale
on. The scale display will initially show “999999”
and begin a countdown boot-sequence to
initialize the scale. While in the gram mode, the
blue backlit display will then show 0.0g after it
stabilizes. The scale will automatically display the
last unit of measure (g, oz, ozt, dwt, gn, ct) that
was programmed into the scales memory.
2. TARE - Push this button once to bring the scales
display back to 0.0g while in the gram mode
(this feature may be used in any mode). When
using a weighing tray or other type of scoop
or container, simply place the tray, etc. on the
weighing platform and then push the TARE (zero)
button once to automatically subtract the weight
of whatever was on the weighing platform while
To Next Page
Loading...