GEMORO PLATINUM PRO501VXP 8
6. After initial calibration, the display will then
read “400.0g”. Gently place the second 200g
calibration weight onto the stainless steel weighing
platform.
6. The display will then show “PASS” which
indicates that the calibration procedure has been
successful. If “Err” appears on the display instead
of “PASS”, this indicates that an error has occurred
in the calibration procedure and the calibration
procedure should be repeated.
PARTS COUNTING (PCS) FEATURE
The parts counting (PCS) feature within your scale
can be really handy if you are in need of counting
a large number of small items (example: findings,
silver beads, gold chains, etc.) very quickly and
accurately. By weighing a minimum sample of
25 pieces (the larger the sample used the greater
the accuracy of the per piece count) the scale will
determine the average weight of each piece and use
that as its reference. Once the reference sample
weight has been determined, you may place an
unknown quantity of the item on the scale and it will
automatically count the exact number of pieces.
To Next Page
Loading...