23
Step 10
Duct Taping all Seams and Sharp Edges:
• Overlap three layers of Duct Tape to completely cover all the seams that will touch the pool liner on
the entire inside of the pool’s inner walls.
Spreading Pool Sand:
• Evenly spread out Pool Sand (not provided) 2” up from the top of the Pressure Plates throughout
the entire inside of the pool. Next, create a sand cove gradually going up an additional 2” along the
inside perimeter of the entire pool’s walls. is will ease the liner’s transition from the pool’s walls at
the bottom to and across the pool’s oor. is will also help prevent liner’s wrinkles.
CONGRATULATIONS!
Your "THE RECTANGLE POOL"is Installed!!!
To Next Page
Loading...