This document outlines the features and usage instructions for the G-Case and OneDock, accessories designed to enhance the Nintendo Switch gaming experience, along with an Adapter for connecting various controllers.

G-Case: Handheld Mode

The G-Case is a protective and functional accessory for the Nintendo Switch, designed to be used in handheld mode.

Function Description

The G-Case serves as a protective shell for the Nintendo Switch while also providing additional functionalities such as charging and Bluetooth connectivity for audio devices. It is designed to improve the ergonomic grip during handheld play.

Usage Features

Attaching your Switch

Open the top flap of the G-case.
Slide the Switch down until it sits properly.
Snap on the flap to secure the Switch. Note: The G-case comes in two models: one for the Switch Regular and one for the Switch OLED. Users must choose the correct model for a perfect fit.

Turn on/off power

To start charging the Switch, press the battery power button. Press it again to stop charging.

Pair Bluetooth

The G-Case supports pairing with two sets of Bluetooth devices simultaneously, such as wireless earphones.

Press both Bluetooth buttons on the G-case at the same time to activate them.
Press either Bluetooth button to initiate pairing. The indicator will flash slowly, signaling it's ready to connect.
To enter pairing mode, press and hold the same button until the indicator flashes quickly. Simultaneously, put your earphone into pairing mode. Once paired, the indicator will stay on. Note: The G-Case can pair two sets of devices at the same time.

Change Grips

The G-Case features removable grips for user customization or access to hidden features. To remove the grips, push them downward. To reattach, slide them upward along the rails until you hear a click. The card slot is hidden beneath the grips.

Recharge other devices

The G-Case's battery can be used to charge other digital devices. To do this, take the battery off the G-case and connect the phone or other digital device via the USB-C port. Note: To fuel the G-Case battery itself, use a USB-C fast charger. To recharge other devices, use a USB-C to USB-C cable.

G-Case: Tabletop Mode

The G-Case can also be configured for tabletop mode, allowing the Switch to be used with detached Joy-Cons.

Usage Features

Step 1: Detach the Switch and Joy-Con holders

Detach the Switch from the G-Case.
Push the left Joy-Con holder upward and the right Joy-Con holder downward to remove them from the G-Case.

Step 2: Assemble Joy-Con holders

Slide to attach the left and right Joy-Con holders together.
Open the side stands from the holders.
Slide the Joy-Con controllers down into the assembled holders.

Step 3: Set up the G-Case

Put the Switch into the G-Case and lock it into place.
Flip out the kickstand on the back of the G-Case.
Set the G-Case on a flat surface for tabletop play.

G-Case: TV Mode (with OneDock)

The G-Case, in conjunction with the OneDock, enables the Nintendo Switch to be connected to a TV for a larger screen experience.

Function Description

The OneDock acts as a docking station, allowing the G-Case (with the Switch inside) to output video to a TV and receive power.

Usage Features

TV Connection

Plug the OneDock into a wall outlet.
Connect the G-case to the USB-C port on the OneDock using the original Type-C cable.
Insert one end of an HDMI cable into the terminal of the OneDock and connect the other end into the HDMI port on the TV. Note: Do not use the USB-A port on the dock to connect the G-case.

OneDock

The OneDock is a versatile docking station that supports charging, screen mirroring, and data transferring functionalities for the Nintendo Switch and other devices.

Function Description

The OneDock serves as a central hub for power, video output, and data transfer, expanding the capabilities of the Nintendo Switch and other compatible devices.

Usage Features

For Charging

Plug OneDock into a power outlet.
Connect the Switch with the OneDock via the included USB-C to USB-C cable.

For Screen Mirroring

Plug OneDock into a power outlet.
Connect Switch with OneDock via a USB-C to USB-C cable.
Connect OneDock with TV/screen via an HDMI cable. Note: Please do not use the USB-A port on the dock to connect the G-case.

For Data Transferring

Connect a computer with OneDock via a USB-C to USB-C cable.
Insert a USB flash drive into the USB-A port on the OneDock.

Adapter

The Adapter is designed to connect various controllers to the Nintendo Switch, PC, and Android TV Box.

Function Description

The Adapter facilitates the use of a wider range of controllers with the Nintendo Switch (including Switch OLED), PC, and Android TV Box, enhancing gaming flexibility. It supports controllers such as PS5, PS4, PS3, and Switch Pro.

Technical Specifications

Supported Consoles: Switch / Switch OLED, PC / Android TV Box
Supported Controllers: PS5 / PS4 / PS3, Switch Pro

Usage Features

Connect to Controllers

On the Switch, go to "System Settings", then select "Controllers and Sensors", and turn on "Pro Controller Wired Communication".
Plug OneDock into a power outlet and connect it with the Switch.
Connect the Adapter with the console via a USB-A port.
Press the Adapter button to enter pairing mode.
Set the controller to pairing mode. Bluetooth will connect automatically.

Adapter Status Light

Flash slowly: Scanning
Flash rapidly: Connecting
Always On: Connected Note: It's normal for the light to stay off until you connect the Switch. There's nothing wrong with it.

PLENBO G-CASE - Page 15