Note:
The displayed message varies depending on the connected device, current operation, and disc type.
Backup from Memory Card to USB
You can copy data stored on the memory card onto a USB device such as a USB drive.
Connect the AC/DC adapter and turn on the drive.1.
Insert a memory card into the memory card slot.2.
Plug in a USB drive to the USB port of the drive. An “3. EasyBurn to Disc. 2 Sources Found”
message appears on the screen.
Press 4.
> to enter the Function (1. Function) menu.
Press 5.
repeatedly to select “3. SD -> USB” and press to confirm the selection.
An “6. SD -> USB. Press
to Start” message appears on the LCD display. Press to start
copying data.
When the copying process is complete, a “7. Completed” message appears on the LCD display.
Note:
The displayed message varies depending on the connected device, current operation, and disc type.
Backup from Audio Disc to USB
You can copy audio files that are stored on the audio CD into a USB device such as a USB drive.
Connect the AC/DC adapter and turn on the drive.1.
Press the 2. Eject button to eject the tray and then place an audio disc on the tray.
Close the disc tray.3.
Plug in a USB drive to the USB port of the drive. A “4. USB -> CD-ROM. Press
to Start”
message appears on the LCD display.
Press 5.
> to enter the Function (1. Function) menu.
Press 6.
repeatedly to select “4. Audio Rip” and press to confirm the selection.
An “7. Audio Rip. Press
to Start” message appears on the LCD display. Press to start
copying audio file.
When the decoding process is complete, the drive automatically ejects and a “8. Completed”
message appears on the LCD display.
Note:
The copied audio files are saved as “*.wav” file format.•
The displayed message varies depending on the connected device, current operation, and disc type.•
To Next Page
Loading...
