Need help?Do you have a question about the Plextor PX-W5224TA and is the answer not in the manual?
General| Brand | Plextor |
|---|---|
| Model | PX-W5224TA |
| Category | CD/CDR Drive |
| Language | English |
Lists the key features and technologies of the PlexWriter drive.
Specifies the minimum system requirements to use the PlexWriter drive.
Details the components and indicators on the front of the drive.
Describes the connectors and jumpers located on the rear of the drive.
Essential safety and handling guidelines for the drive and media.
Expedited installation guide for experienced PC users.
Steps to access and prepare the computer's interior for drive installation.
Guide to identifying the computer's current IDE setup to ensure compatibility.
Instructions for configuring the drive's Master/Slave/Cable Select setting via jumpers.
Detailed steps for moving jumpers to set the drive's IDE configuration.
Guidance on choosing the correct IDE configuration based on system setup.
Explanation of the Cable Select feature for IDE device configuration.
How to determine if your system utilizes Cable Select for IDE devices.
How to identify Master/Slave connectors on a Cable Select cable.
Instructions for setting the DMA jumper for optimal data transfer modes.
Core steps for physically installing the drive into the computer system.
Steps for physically mounting the drive into a computer bay.
Detailed instructions on correctly connecting the IDE ribbon cable.
Steps to verify the drive is detected by the computer system.
Procedure to check drive recognition within the Windows operating system.
Information on compatible CD media types and their writing/reading speeds.
To Next Page
