Cleaning
Great care needs to be taken during the cleaning process, all cleaning is to be carried out
by hand using a gentle cloth or sponge soaked in non-aggressive detergent and then rinsed
with a cloth dampened with water. Ensure all moving parts are re-
lubricated where necessary.
DO NOT USE AGGRESSIVE DETERGENTS.
DO NOT USE WATER JETS OR HOT WATER JET CLEANERS.
Check and re-lubricate parts as described in section 10.7
9.1 Cleaning Instructions Access™ EA & Access™ EAB
9
9.1 Cleaning Intructions Access™ EA & Access™ EAB
To Next Page
Loading...