What to do if the Plusmed Medical Equipment LCD screen displays alarm code “H04”?
If the LCD screen displays alarm code “H04”, it indicates that the device is delivering a lower concentration of oxygen than specified. You should change to another source of oxygen and contact your equipment provider.
What to do if the Plusmed pM-KN03T Medical Equipment LCD screen displays alarm code “E02”?
If the LCD screen displays alarm code “E02”, this indicates that the user’s breath rate is exceeding the capacity of the device. The indicator resets itself when breath rate is reduced. If this indicator occurs on a routine basis, contact your home care provider.
What to do if my Plusmed pM-KN03T Medical Equipment won't turn on?
If your equipment isn't turning on, there could be a couple of reasons: * There might be no power supply from the battery. In this case, use AC/DC power to charge the battery. * A technical fault may have occurred. Contact your home care provider.
What to do if Plusmed pM-KN03T LCD screen displays alarm code “E01”?
If the LCD screen displays alarm code “E01”, it means the machine hasn't detected breath for 2 minutes or more. Check the connection from the cannula to the device. Make sure the nasal cannula is properly positioned on your face and that you are breathing through your nose. Also, ensure the cannula tubing is not kinked or obstructed.
Why is my Plusmed pM-KN03T Medical Equipment battery not charging?
If the battery is not chargeable, it could be due to a blown fuse inside the power adapter. You can try changing to a new fuse (Fuse model: T3.15AH250V, size: 8.5*4*8.5).
What to do if Plusmed pM-KN03T LCD screen displays alarm code “H05”?
If the LCD screen displays alarm code “H05”: 1. Make sure there is no blockage to the machine’s air inlet or exhaust window. 2. Stop the machine for a while to cool the temperature.
What does it mean if the Plusmed Medical Equipment battery power display on LCD screen is empty and with beep alarm?
If the battery power display on the LCD screen is empty and there's a beep alarm, it indicates a lack of power. You should use AC/DC power to charge the battery.
Explains the pressure swing adsorption technology for separating medical oxygen from air.
Defines the model PM-KN03T and its basic functions.
Details the primary functions and various alarm indicators of the device.
Presents a table of technical specifications including power, rates, and dimensions.
Alarm indicating no breath detected for 2 minutes, displays 'E01'.
Describes battery levels indicated by LEDs on the LCD screen.
Alarm when user's breath rate exceeds device capacity (20BPM), displays 'E02'.
Indicates any technical fault with alarm code 'H06'.
Alarm when switching from AC power to battery supply.
Alarm when oxygen concentration drops below 82%, displays 'H04'.
Alarm due to internal temperature increase, displays 'H05'.
Yellow light indicates the machine requires maintenance.
Instructions for cleaning the external case of the concentrator.
General| Product Name | Plusmed pM-KN03T |
|---|---|
| Category | Medical Equipment |
| Color | White |
| Type | Infrared Thermometer |
| Measurement Range | 32.0°C - 42.9°C (89.6°F - 109.2°F) |
| Power Source | DC 3V |
| Battery Type | AAA (2 pieces) |
To Next Page