Plusmed pM-TE01 - Care and Maintenance Instructions; Stimulator Care; Cable Care; Electrode Handling

Plusmed TENS+EMS Stimulator Technical
Specications
Channel : Dual, isolated between channels.
Pulse Amplitude : Adjustable 0 – 80mA peak into 500Ω load each channel.
Pulse Rate : As pre-programming operation mode.
Pulse Width : As pre-programming operation mode.
Software ramp up feature : Pulse width ramp up when change mode.
Timer : 5~60 min. selectable.
LCD : Show modes, pulse rate, pulse width, timer, CH1/CH2,
intensity level.
Wave Form : Symmetrical Bi-Phasic square pulse.
Max Charge per Pulse : 20.8 micro-coulombs maximum.
Interdependency : 5% maximum.
Power Source : 3 x AAA / 4.5 Volt batteries
All electrical specications are ±20% at 500 Ω load.
Warranty
This Plusmed TENS+EMS DUAL THERAPHY System carries a two years warranty from the date of
purchase.
The warranty does not apply to damage resulting from failure to follow the operating instructions,
accidents, abuse, alterations or disassembly by unauthorized individuals.
The warranty applies to the main device and necessary parts and labor relating thereto. Battery,
lead wires, electrodes, and other accessories are warranted to be free from defects in workmanship
and materials at the time of delivery.
The distributor reserves the right to replace or repair the unit at their discretion.