Connect and Install Driver
Insert the product CD or visit Plustek website to download
and install scanner driver.
www.plustek.com/d430
Check the system tray to see if the installation is successful
when the scanner is connected.
Scan Document & Plastic Cards
a
b
b. Down: vertical ejecta. Up: horizontal eject
* Remember to select Card as Page Size to scan and eject the
card from the front side of the scanner.
PDF Utility
1. Click button to select saving folder.
2. Click Setup button to select the lename format.
3. Select desired le format. This selection should match with the selection
of Scan Mode.
4. Click Congure button to congure advanced settings, you may select
to generate all pages in one le. Click Setting button to select the
desired OCR language.
5. Check the scan settings and make any required changes.
6. After all settings are done, click Apply button.
7. Double-click on PDF icon to scan. Or press up/down function button
to select corresponding number then press the Scan button on the
scanner panel.
BCR Utility
1. Select the desired BCR language.
2. Check the scan settings and make any required changes.
3. After all settings are done, click Apply button.
2
1
MobileOfce D430
Quick Start Guide
* Keep the Calibration Sheet in case you need to calibrate the scanner in the future.
* Calibration sheet
To Next Page
Need help?
General
