16
HOW TO’S
STEP 1:
Wash skin and be sure the
area is completely dry before
treatment.
STEP 2:
Start with the White training
disc. Begin on the neck or
forearm.
STEP 3:
Pull skin taut with your free hand
so the Personal Microderm will
glide smoothly over the skin.
STEP 4:
Move the Personal Microderm
in an upward fluid moon
across the skin. Do not hover
in any spots.
STEP 5:
Immediately aer treatment
wash and dry the face followed
by a toner and moisturizer.
STEP 6:
Clean the cap and filter aer
use with rubbing alcohol or
anbacterial soap. Let dry.
NOTE: Keep the Personal Microderm moving and do not make more than two passes over the same
area during treatment. For best results use the PMD Daily Cell Regeneration System.