Getting Started with the Eagle™ •
••
•
Figure 2 – The Eagle 440™
Available Inputs
Direct connections are supplied for 2, 3, or 4 voltage
600VAC)
and 4 current inputs. The amount of current that can be
monitored is dependent on the CT being used.
inputs are available to be recorded and used with reports and
interval graphs. To record a voltage or current inpu
must be selected when initializing the recorder using ProVision
WinScan.
Instrument Size and Construction
The Eagle recorder is contained in a 5 ⅜
inch (60.3 mm) by 1 13/16
inch (46mm) NEMA 4X sealed box,
suitable for outdoor installation.
performed by PMI
. High voltages are present inside the uni
servicing by unauthorized personnel can result in
or bodily injury.
11
(0 to
and 4 current inputs. The amount of current that can be
inputs are available to be recorded and used with reports and
must be selected when initializing the recorder using ProVision
or
by 2 ⅜
inch (46mm) NEMA 4X sealed box,
. High voltages are present inside the uni
t and