Need help?Do you have a question about the Pneu-Dart 193 and is the answer not in the manual?
Steps to open the bolt, check the action, and perform a visual inspection before cleaning.
Instructions for cleaning the projector's exterior and dart barrel with oil.
Steps for cleaning the power control mechanisms on specific projector models.
Instructions for cleaning the gas chamber on all models except 389.
Specific instructions for cleaning the power control within the gas block for Model 389.
Details on cartridges, sights, weight, power control, and range for Model 196.
Step-by-step instructions on how to load the dart barrel for Model 196.
Instructions for loading clips and cautions against using wads.
Explanation of how the power control knob adjusts dart velocity and pressure.
Details on cartridges, sights, weight, power control, and range for Model 389.
Step-by-step instructions on how to load the dart barrel for Model 389.
Instructions for loading clips and cautions against using wads.
Explanation of the Model 389 power control knob and its function.
Instructions on using a rod as an extraction tool for the power control.
Steps for reassembling the power control and gas block after cleaning.
Figures illustrating alignment of the gas control valve and gas block for Model 389.
Warnings regarding leaving darts in the projector and wearing eye protection.
Details on cartridges, sights, weight, power control, and range for Model 193.
Step-by-step instructions on how to load the dart barrel for Model 193.
Explanation of how power/velocity is controlled by the power charge and control valve.
Cautions against using wads and notes on calibrating power charges for optimal impact.
Step-by-step instructions for safely disassembling the projector.
Procedure for adjusting trigger pull weight using hex key and retaining nut.
Steps for reassembling the projector action, stock, and magazine.
Twenty rules for safe handling, storage, and operation of projectors.
Explanation of how projector cycling affects performance and ignition.
Important warnings regarding child access and the recommendation for safety courses.
List of factors that influence projector velocity.
Information on authorized repair service and implied warranties.
To Next Page
General