Pneumercator TMS 3000 - Print Log Procedure; Entering Access Mode; Printing Logs; Returning to Normal Mode

TMS Quick Reference.doc Page 2 of 2 July 1, 2009
Print Log Procedure
Print Log(s)
selected log
Return
Return Return
Return
selected log
Log
LogLog
Log Return
Return Return
Return Log
LogLog
Log
Return
Return Return
Return
normal mode
Return to Normal Display Mode*
Inventory
InventoryInventory
Inventory
L
E
G
E
N
D
Log
LogLog
Log
Enter Access Mode
Press and release. Press and hold
until second beep.
Flashing Display
While holdin
Note: the list of logs may vary with the version of firmware in the TMS.
g the TEST button, hold the MODE button until is displayed, then release buttons.
,
EDIT EDIT
, ,
,
or
, ,
STEP EDITEDIT
, ,
or EDIT
,
Inventory
InventoryInventory
Inventory
Log
LogLog
Log
Inventory
InventoryInventory
Inventory
xxxxxxxxxx xxxxxxxxx xxxxxxxx
xxxxxxxxxx xxxxxxxxx xxxxxxxx
xxxxxxxxxx xxxxxxxxx xxxxxxx
xxxxxxxxxx xxxxxxxxx xxxxxxxx
xxxxxxxxxx xxxxxxxxx xxxxxxx
xxxxxxxxxx xxxxxxxxx xxxxxxxx
xxxxxxxxxx xxxxxxxxx xxxxxxx
xxxxxxxxxx xxxxxxxxx xxxxxxxx
xxxxxxxxxx xxxxxxxxx xxxxxxxx
xxxxxxxxxx xxxxxxxxx xxxxxxx
xxxxxxxxxx xxxxxxxxx xxxxxxxx
xxxxxxxxxx xxxxxxxxx xxxxxxx
xxxxxxxxxx xxxxxxxxx xxxxxxxx
selected log
*Return to normal tank gauging
display mode may also be achieved
by allowing console to timeout for
four minutes with no pushbutton
activity.
1.
2.
3.
PRINT
rEturn
Events
ALarms
tank Leak
LIne Leak
Water
Orders
tHefts
saLes
deLivery
Inventory
Leak Hist