PNI CT400 - General Information and Warnings; Mode of Operation and Communication

EN
3
WARNINGS
Because the product must be connected to a 230 VACpower supply and to a heating appliance, installation
should only be carried out by qualied personnel to avoid irreparable damage to the product and / or the
heaters thatare connected , defects not covered by warranty.
We recommend that you have qualied personnel with experience in this eld, for initial setup of the equipment
in order to understand correctly the technical terms and procedures detailed in this manual.
After installation and conguration, the product is easy to use both mobile unit and smartphone controll with an
intuitive and easy to congure interface.
To access / monitor / control the product remotely from your smartphone, it is necessary to have an internet
source (WiFi router) close to where thermostat is installed.
GENERAL INFORMATIONS
The PNI CT400 smart thermostat has been developed to provide customers extra day-to-day comfort in their
homes, in the o󰀩ce or other premises, o󰀨ering the ability to monitor and turn on or o󰀨 heating systems either
automatically scheduled for every day of week, eitherremotely, anytime and anywhere via the Internet with
dedicated app for Android or iOS Smartphone for two distinctive zones hydraulically separated by pumps,
solenoid valves or or even separate heating boilers.
Mode of operation and communication:
Dedicated app name is TuyaSmart
and can be downloadedeither
from the Googel Play /App Store,
either by scanningwith your
smartphone the QR
code below:
Package content:
- 2 x Main unit with illuminated screen
- Receiver / 2 relay command unit
- Wall / table mount accessories
- User manual