PNI DE50 - User Manual

User manual 2
Englis h
External speaker PNI DE50 for CB radios
Technical specifications
• Impedance: 8 Ohm
• Maximum power: 5 W
• Connector 3.5 mm
• Housing material: ABS / metal
• Cable length: 190 cm
• Frequency range: 300-8500Hz
• Dimensions: 130x66x56 mm
• Working temperature: -26°C ~ +80°C
Instructions for use
• Install the external speaker using the included metal bracket.
• Using the side screws, tilt the speaker to the desired position.
• Connect the 3.5mm jack of the external speaker to the EXT. SP port of
CB radio.
• After connecting the external speaker, the internal speaker of the CB
radio will be turned o automatically, and the sound will be output through
the external speaker.
Safety warnings
• Do not hold the external speaker in direct sunlight.
• Do not run the external speaker cord through areas that could damage
the insulation or even break the wires.
• Do not position the external speaker close to the air conditioning outlet.
• Do not position the external speaker close to the airbags.