PNI EXTRA 48 User Manual

CB ANTENNA PNI EXTRA 48
PNI EXTRA 48 is a small CB radio antenna suitable for cars and trucks, compatible with all CB
radio transceivers on the market. It is very easy to install with the magnetic mount included in the
package.
MOUNTING INSTRUCTIONS
Fix the antenna on the magnetic base and position it in the center of the car dome.
Connect the antenna to the CB transceiver.
Note:The antenna is tuned from the factory.
TECHNICAL SPECIFICATIONS
Frequency 26 – 28 MHz Whip length 440 mm
Gain >5dbi Cable RG174, L=4000 mm
S.W.R. ≤ 1.0 Polarity Vertical
Power max. 150W Material Fiberglass
Impedance 50 Ohm Magnetic mount 103 x 66 x 40 mm
ANTENA CB PNI EXTRA 48
PNI EXTRA 48 es una antena de radio CB pequeña adecuada para automóviles y camiones,
compatible con todos los transceptores de radio CB en el mercado. Es muy fácil de instalar con el
montaje magnético incluido en el paquete.
INSTRUCCIONES DE MONTAJE
Fije la antena en la base magnética y colóquela en el centro del domo del automóvil.
Conecte la antena al transceptor CB.
Nota: la antena está sintonizada desde la fábrica.
ESPECIFICACIONES TÉCNICAS
Frecuencia 26 – 28 MHz Longitud del látigo 440 mm
Ganancia >5dbi Cable RG174, L=4000 mm
S.W.R. ≤ 1.0 Polaridad Vertical
Poder max. 150W Material Fibra de vidrio
Impedancia 50 Ohm Montaje magnético 103 x 66 x 40 mm
EN
ES

PNI EXTRA 48 Specifications

General

Frequency Range	26-28 MHz
Material	Stainless Steel
Impedance	50 Ohm
Working Distance	10 km
VSWR	<1.2:1
Connector Type	PL-259

Summary

Mounting Instructions

Factory Tuning

The antenna is tuned from the factory, ensuring it is ready for immediate use.

Technical Specifications

Frequency Range

Specifies the operational frequency band for the CB antenna.

Gain

Indicates the antenna's signal amplification level.

S.W.R.

Represents the Standing Wave Ratio, a measure of antenna efficiency.

Power Handling

Details the maximum power the antenna can safely handle.

Impedance

Specifies the antenna's electrical impedance.

Whip Length

The physical length of the antenna's radiating element.

Cable Type and Length

Identifies the type and length of the included coaxial cable.

Polarity

Describes the orientation of the antenna's radiation pattern.

Material

Indicates the primary material used in the antenna construction.

Magnetic Mount Dimensions

Provides the size specifications for the magnetic base mount.