To Next PageTo Next PageWhy is my PNI HU180 Accessories device not releasing vapors?
If your PNI Accessories device isn't releasing vapors or is only releasing a weak amount, check the ultrasonic vibration plate for any dirt buildup. Also, make sure all device components are correctly positioned and that the inlet and outlet holes aren't clogged.
What to do if water flows out of the PNI Accessories device?
If water is flowing out of your PNI Accessories device, it could be due to incorrectly positioned components. Another reason might be high temperature and humidity in the room, causing the vapors to condense and leak. Under these conditions, the vapors could condense, and the condensate could leak on and around the device.
General| Brand | PNI |
|---|---|
| Model | HU180 |
| Category | Accessories |
| Language | English |
Steps covering device setup, including removing cover, connecting power, filling tank, and plugging in.
Instructions on how to activate and set the mist timer for 1, 3, or 6 hours, or continuous ON/OFF.
Guidance on turning on the LED lights and adjusting their intensity.
Key warnings on storage, cleaning, auto shut-off, vapor variation, and essential oil usage for safe operation.
Detailed steps for cleaning the device, including unplugging, emptying, and washing with neutral detergent.
Warnings regarding water levels, direct sunlight, heat sources, placement, and continuous use limits.
Solutions for when the device does not turn on or off.
Troubleshooting steps for no vapor or weak vapor emission.
Addressing issues where water flows out of the device.
Statement of compliance with EU directives and link to full text.
