User manual 10
English
Connecting the camera to the WiFi network
1. Press the icon next to the camera you want to configure.
Note: The camera status must be Online.
2. Select “Wireless Setting”.
3. Select the WiFi 2.4 GHz network you want to connect the
camera to and enter the network’s password. Press “Apply”.
The message “Wireless setup is successful” will be displayed.
Recording configuration on the micro SD card
1. Install a maximum 128Gb micro SD card in the camera.
2. Open the app, press the icon next to the camera you want
to configure. Note: The camera status must be Online.
3. Select “SD card plan recording”.
4. Activate the “Whether to enable record” option.
5. Activate daily recording, from Monday to Sunday, or manually
set the recording days and time interval.
6. Return to the main menu and select the “SD Card setting”
option to check the available space on the card.
Activate recording only when motion is detected
Note: When the micro SD card installed in the camera has
a reduced capacity, we recommend activating the recording
function only upon motion detection.
1. Open the app, press the icon next to the camera you want
to configure. Note: The camera status must be Online. Select
“SD card plan recording”.
2. Activate the option “Whether to enable record“.
To Next Page
Loading...
