Need help?Do you have a question about the PNI MAB300 and is the answer not in the manual?
General| Power supply | 230V AC |
|---|---|
| Maximum gate weight | 300 kg |
| Protection class | IP44 |
| Maximum Current Draw | 1.5A |
| Frequency | 433.92 MHz |
| Operating Temperature Range | -20°C to +50°C |
| Wireless Range | 30 m |
Details how to adjust the angles of the rear bracket for installation.
Provides dimensions for adjusting the gate opening angle based on specific measurements.
Details the connections and functions of the control board terminals for system setup.
Step-by-step guide on how to add or pair a new remote control with the system.
Instructions for erasing previously paired remote controls from the system.
Overview of navigating the settings menu and saving configurations.
Configures the slow start duration and motor stall force levels.
Configures high-speed running duration and automatic closing delay after card swipe.
Defines the time delay between the opening or closing of the two gate motors.
Manages the operation of indicator lamps and alarms based on gate status.
Sets gate locking duration and configures the system for single or double gate operation.
Configures photocell sensor mode and performs a factory data reset.
To Next Page
