To Next PageTo Next Page
Need help?Do you have a question about the PNI SafeHouse HS600 and is the answer not in the manual?
General| Mobile App Support | Yes, iOS and Android |
|---|---|
| Storage | MicroSD card (up to 64GB) |
| Connectivity Technology | Wireless |
| Maximum Number of Wireless Sensors | Up to 50 |
| Arming/Disarming Methods | Mobile app, remote control, RFID tag |
| Alarm Notification | Mobile app push notifications |
| Material | ABS Plastic |
| Mounting | Wall mount or tabletop |
Lists all items included in the alarm system package.
Explains how to connect wired sensors and devices to the system.
Details various system settings for delay, sound, and warnings.
Enables or disables features like SMS alerts, keypad lock, and voice prompts.
Covers system and user password changes for security.
Allows changing the system language and resetting to factory defaults.
Instructions for adding, deleting, and managing remote controls.
Guides for adding, editing, and deleting wireless and wired sensors.
Procedures for adding, deleting, and managing RFID tags.
How to pair a wireless siren with the alarm system.
Defines names and numbers for EOLR wired zones.
Enables wireless socket activation upon alarm events.
Configures the system's WiFi connection using the AirLink method.
Displays the MAC and IP addresses of the WiFi module.
Establishes a WiFi hotspot connection for the system.
Allows recording, playing, and managing voice messages.
Configures automatic arming and disarming times.
Enables/disables time synchronization using WiFi network information.
Enables/disables time synchronization using GSM network information.
Sets up to 5 phone numbers for alarm notifications via SMS or voice call.
Procedure for pairing a new remote control with the system.
Instructions for removing a specific remote control.
Removes all previously paired remote controls from the system.
Steps to pair a new wireless sensor to the alarm system.
Procedure for modifying or removing an existing sensor.
Removes all paired wireless sensors from the system.
Procedure to pair a new RFID tag with the system.
Instructions for removing a specific RFID tag.
Removes all previously paired RFID tags from the system.
Pairs wireless sockets or relays for automated actions.
Retrieves basic system settings like serial number and language.
Retrieves advanced network and server settings.
Arms all zones and sensors for comprehensive security.
Arms perimeter zones, allowing movement inside the house.
Procedure to disarm the alarm system using various methods.
Manually activates the alarm system for emergencies.
