Ensure SSD orientation is correct
for motherboard installation.
SSD PCIe Gold ngers
Protective Film
Protective Film
PNY M.2 2280 SSD RGB Heatsink
Product Assembly Guide
Included Parts - Aluminum base plate with thermal pad, heatsink with thermal pad, 4x screws.
ELECTROSTATIC DISCHARGE WARNING: Electronic components may become damaged
by electrostatic discharge (ESD). Handle all parts with extreme caution to prevent damage, includ-
ing but not limited to the Solid State Drive (SSD). Consider learning about and taking ESD protection
measures for your equipment. Before removing components from the antistatic foam, touch a
grounded metal object.
1. Using a Phillips #1 screwdriver, remove
the 4x screws holding the heatsink and base
plate together. Save these 4 screws for
reassembly later.
2. Remove the protective lm from the
thermal pad on the heatsink baseplate
exposing adhesive surface. Do not remove
the thermal pad itself.
3. Align the SSD screw cutout with the heatsink
base plate cutout. Attach the SSD to the
adhesive surface of thermal pad, making sure
the cutouts remain aligned. When looking from
above, the PCIe notch should be to the right as
shown in the picture.
4. Remove the protective lm from the
thermal pad on the heatsink. Do not remove
thermal pad itself. Align the heatsink’s
screw holes with the base plate.
IMPORTANT: For best results, remove the top decorative label from the SSD so that the controller and ash are
exposed. Ensure SSD orientation is correct for motherboard installation.
5. When placing the heatsink on top of the SSD,
ensure that the fan cable is on the same side as
the PCIe connector notch of the SSD. Then align
the heatsink’s screw holes with the base plate.
Press the heatsink down until the screw holes are
in alignment using even, gentle pressure.
6.Fasten the heatsink to the heatsink base
plate with the 4x screws from Step 1 using
a Phillips #1 screwdriver.
Note: Fans will not spin until drive reaches around 43°C.
Please visit our regional sites for more information and technical support.
www.pny.com (USA) www.pny.eu (Europe) www.pny.com.tw (Asia)
91009706-RGB
To Next Page
Need help?
General
