EasyManua.ls Logo

PO Fung Electronic BF-88A User Manual

PO Fung Electronic BF-88A
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User ManualFCC&IC Draft
Model: BF-88A
ATTENTION
Your BF-88A is a multi-task FRS transceiver. Combining the latest technology in radio communication along with a sturdy
mechanical frame, BF-88A is the ideal and effective solution for the professionals who need to stay in touch with the
working team (in construction sites, buildings, shows, trade fairs or hotels) or for leisure users that just want to keep up
with friends and family.
To help you ward off bodily injury or property loss that may arise from improper operation, please read all the information
carefully before using our products.
Intended Use
Our products are designed to provide reliable wireless communication services for users across many industry sectors. In
order to use the products safely and to achieve the best performance, they must be used as intended. The operator of the
product is responsible for damage to the product or damage caused by the product if the product was used beyond the
intended use instructions.
Intended use includes that:
The product is used by users who have full knowledge of its RF exposure and can exercise control over their RF exposure
to meet the occupational limits in FCC/ICNIRP and international standards.
All the security instructions set forth in this document are always heeded.
The general, national and in-house safety regulations are heeded.
The product is exclusively used with the frequencies licensed by the respective authority.
The product is configured appropriately by the dealer.
Besides, intended use also requires the product operator to be well-trained and to be familiar with the applicable
standards, regulations and provisions.
REGULATORY Information
Important: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this device. Your radio is set up to transmit a regulated signal on an assigned frequency. It is
against the law to alter or adjust the settings inside the radio to exceed those limitations. Any adjustments to your radio
must be made by qualified technicians.
To be safe and sure:
Never open your radio’s case.
Never change or replace anything in your radio except the battery.
• Any attempt to change frequencies or output power of the radio invalidates the approval
Your radio might cause TV or radio interference even when it is operating properly. To determine whether
Your radio is causing the interference, turn it off. If the interference goes away, your radio is causing it.
Try to eliminate the interference by moving your radio away from the receiver. If you cannot eliminate the interference,
the FCC requires that you stop using the radio.
Hazardous Environments: Do not operate the radio in hazardous environments. Explosion or fire may result.
Do not operate the radio near unshielded electrical blasting caps.
Under certain conditions, radios can interfere with blasting operations and may cause an explosion. Turn your radio OFF
to prevent accidental transmission when in a blasting area or in areas posted: "Turn off two-way radio." Construction
crews often use remote control RF devices to set off explosives.
Note: Use of this radio outside the country where it was intended to be distributed is subject to government regulations
and may be prohibited.
RF EXPOSURE INFORMATION
WARNING! Read this information before using the radio. In August 1996 the Federal Communications Commission (FCC)
of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human
Exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters.Those guidelines are
consistent with the safety standard previously set by both U.S. and International standards bodies. The design of the radio
complies with the FCC guidelines and these international standards.Never allow children to operate the radio without
adult supervision and the knowledge of the following guidelines.
WARNING! It is up to the user to properly operate this radio transmitter to insure safe operation. Please adhere to the

Questions and Answers:

PO Fung Electronic BF-88A Specifications

General IconGeneral
Frequency Range400-470 MHz
RF Output Power5W
Output Power5W
Channel Capacity16
Channels16
Antenna Impedance50Ω
Operating Voltage3.7V
BatteryLi-ion battery

Summary

Intended Use

Regulatory Information

RF Exposure Information

FCC Compliance

Electromagnetic Interference/Compatibility

Details how radio RF energy can cause interference and how to avoid it.

Occupational/Controlled Use

Explains the context for radio use where users are aware of RF exposure.

IC Compliance

Precautions for Batteries

Charging Prohibitions

Lists safety rules to prevent property loss or injury during battery charging.

Maintenance Instructions

Provides guidelines for maintaining battery health and longevity.

Transportation Instructions

Outlines rules for safely transporting batteries, including damaged ones.

Precautions for Disposal

Care and Safety

Package Contents

Main Characteristics

Coverage and Range

Battery Recharge

Main Controls and Parts of the Radio

Operations

Power On/Off and Volume Adjustment

Instructions on how to turn the radio on/off and adjust the volume level.

Transmission

Guide on how to communicate, including using Monitor and PTT features.

Monitor

Explains how to use the Monitor feature to listen to weak signals.

Scan

Details how the Scan function works, including automatic start and busy channel detection.

CTCSS/DCS Tones

Flashlight

Prompt Voice Switch Settings

On-line Service and Support

Troubleshooting Guide

Technical Specifications

FRS Channels and Frequencies

Disclaimer