POCTech CT100C - Page 2

POCTech CT100C (CT10) CGM
Frequently Asked Questions
March 2020 – Global FAQ Master
Page 2 of 21
Question
Response
3.
What is included in the POCTech CT-10 Welcome
Kit?
The POCTech CT-10 Welcome Kit includes:
CGM Kit
 Receiver (contains USB cable inside box)
 Transmitter (contains extra battery cover in box)
 1 - 10-day Sensor
 User Guide
 Quick Start Guide
4.
What is included in the POCTech CT-10 Sensor kit?
The POCTech CT-10 Sensor Kit includes:
 1 - 10-day Sensor
 Quick Start Guide
5.
Does the POCTech CT-10 kit include alcohol wipes
to clean the skin before inserting a new sensor?
No, alcohol wipes are not included.
6.
Where is POCTech CT-10 manufactured?
POCTech CT-10 is manufactured by POCTech in Zhejiang, China.
7.
How is POCTech CT-10 sterilized?
The sensor is sterile in its unopened, undamaged package. Do not use any sensor if its sterile
package has been previously damaged or opened. The sensor is Sterilized using irradiation.
(Reference: User Guide)
8.
How does POCTech CT-10 work?
The POCTech CT-10 glucose sensor is applied by the user to their upper arm or abdomen using
the sensor inserter as per the device’s user manual. The sensor contains a tiny filament which
measures the amount of glucose in the interstitial fluid inside the body. A transmitter which is
attached to the sensor sends real time sensor signals every 3 minutes via Bluetooth
®
to the
receiver where glucose readings are continuously displayed to the user throughout the day and
night.
9.
Does POCTech CT-10 have a warranty?
Yes, the POCTech CT-10 Receiver and Transmitter are covered by a 2 year warranty.
10.
Is Sensor/Transmitter available in different colors?
No. At this time, it is only available in white.
11.
How should POCTech CT-10 sensors be stored?
POCTECH CT-10 sensors should be stored away from heat and direct light at temperatures
between 2

C – 30

C (35

F – 86

F). Keep POCTech CT-10 Sensors in the individual sealed
package until ready for use. When ready for use, allow sensor 30 minutes to warm up to room
temperature. During normal wear time, sensor should be maintained between temperature 15

C –
40

C (59

F – 104

F). (Reference: User Guide)
 Used POCTech CT-10 sensors should be discarded according to local medical waste
regulations.
 Do not use POCTech CT-10 sensor after the expiration date shown on the carton.
 Do not use any POCTech CT-10 Sensors that are damaged or shows signs of tampering.
 Keep POCTech CT-10 out of the reach of children.