3.
Place ratchet strap in correct position in buckle
on both sides of the kayak.
Straddle the front part of the kayak facing
backwards and lift, using the rails, hooking the
two parts together, then lower, automatically
locking them.
Push both parts of the kayak together, so that
the ratchet strap is approx 2 cm inside the buckle.
Tighten the buckle, but do not overload buckle,
as this can damage the ratchet strap or buckle
lever. You can also lift the back and the buckle
will close automatically.
1. 2.
4.
To Next Page
Loading...
