EasyManua.ls Logo

Point 65 martini User Manual

Point 65 martini
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Point 65 Sweden
Manual

Other manuals for Point 65 martini

Question and Answer IconNeed help?

Do you have a question about the Point 65 martini and is the answer not in the manual?

Point 65 martini Specifications

General IconGeneral
BrandPoint 65
Modelmartini
CategoryBoat
LanguageEnglish

Summary

Assembly Instructions

Step 1: Place Ratchet Strap

Place ratchet strap in correct position in buckle on both sides of the kayak.

Step 2: Connect Kayak Sections

Push both parts of the kayak together, so that the ratchet strap is approx 2 cm inside the buckle.

Step 3: Secure Sections

Straddle the back part of the kayak and lift, hooking the two parts. Then lower, automatically locking them.

Step 4: Tighten Buckle

Tighten the buckle, but do not overload buckle, this can damage the ratchet strap.

Rudder Line Setup

Thread Loop End

Pull the loop end of the rudder lines through the holes in the rudder head from above.

Fold Over Corners

After pushing the loop through the hole, fold them back over the end corners.

Tighten Loops

Tighten the loops over the corners by pulling on the rudder lines.

Ensure Correct Routing

Make sure the line runs along the outside of the 2 deck fittings on either side of the hatch.

Safety and Usage Precautions

Use Personal Flotation Device

Always use a personal flotation device when paddling. Read warning sticker on kayak before usage.

Avoid Overloading When Moving

Never place heavy objects in the kayak while carrying or dragging; this can damage the locking system.

Do Not Drag With Occupants

Never carry or drag the kayak with someone sitting in it, as this can damage the locking system.

Limit Surf Paddling Conditions

Never paddle the kayak in surf larger than 3 feet in Tandem or 5 feet in Solo, as this can lead to damage.

Related product manuals