Point 65 martini - Assembly Instructions; Step 1: Place Ratchet Strap; Step 2: Connect Kayak Sections; Step 3: Secure Sections

3.
Place ratchet strap in correct position in buckle
on both sides of the kayak
Straddle the back part of the kayak and lift,
hooking the two parts. Then lower, automati-
cally locking them.
Push both parts of the kayak together, so that
the ratchet strap is approx 2 cm inside the buckle.
Tighten the buckle, but do not overload buckle,
this can damage the ratchet strap.
1. 2.
4.