3
Charge the Keyboard
When the battery power is low, the charging indicator
blinks.
1. Use the micro
USB cable to
connect the
keyboard to
a USB power
adapter. The
USB power
adapter should
supply DC 5V, 500mA.
2 Plug the power adapter to a wall outlet. The charging
indicator lights red during charging, and turns green
when charging is complete.
3. Unplug the charging cable after charging.
Lithium Battery Safety Instructions
• Do not burn or bury batteries. Do not puncture or
crush. Do not disassemble.
• Do not dispose of lithium batteries in the trash. Recycle
at your local retail store.
• Use only chargers rated for lithium cells. Be sure the
charger’s voltage and current settings are correct for
the battery pack being charged.
• If the electrolyte in the cells gets on your skin,
thoroughly wash with soap and water. If in the eyes,
rinse thoroughly with cool water. Immediately seek
medical attention.
• Follow the manufacturer’s instructions for charging the
product and do not charge longer than recommended.
Unplug the charger when the battery is charged.
To Next Page