15
Warning!
-
It must be possible to disconnect the appliance from the mains power
supply; the plug must therefore be easily accessible after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the
rating plate correspond to your domestic power supply. The appliance must
be earthed. The power supply cable plug is provided with a contact for this
purpose. If the domestic power supply socket is not earthed, connect the
appliance to a separate earth in compliance with current regulations,
consulting a qualified electrician. The manufacturer declines all responsibility
if the above safety precautions are not observed. This appliance complies
with the E.E.C. Directives.
Door reversibility
Before reversing the door, prepare the below tools and material: straight
screwdriver, cross screwdriver, spanner and the components included in the
poly bag.
Easy open handle
x1
Handle cover x2 Screw x2 Left aid-closer x1
Left top hinge
cover x1
1. Remove upper wire box covers.
To Next Page
Loading...