11
The following functions must be worked under the start state.
Quick-Frozen Mode entry
When the system is at non Quick-Frozen Mode, press and hold Super FRZ
key (A key) for three seconds to start the Quick-Frozen Mode, and the
quick-frozen icon will illuminate, and the display will show the defaulting
quick-frozen time (6 hours). Press temperature regulation keys ∧ (C key) or
∨ (D key) to change quick-frozen time. A change needs 6 hours. Adjustment
range is between 6 hours to 48 hours. If you do not press any key in five
within five seconds, you can press Super FRZ key (A key) manually for
confirmation and it will show "-24°C ". Then, the freezer will work under
Quick- Frozen Mode.
Note: The freezing capacity marked on the rating label is the test result of
quick-freeze mode (mentioned above) setting in 48 hours.
Exit from Quick-Frozen Mode
quick-frozen time, press and hold Super FRZ (A key) for three seconds or
change the set temperature by pressing certain keys to exit form
Quick-Frozen Mode, and then the quick-frozen icon will not illuminate any
more. After withdrawing from the Quick-Frozen Mode, it will run at the mode
having been set before.
Note: if it is shut down or has a power failure when the Quick-Frozen Mode is
under operation, it will continue to run under the Quick-Frozen Mode after
recovery.
Set the temperature of the refrigerating chamber
Press temperature regulation keys ∧ (C key) and ∨ (D key) to set the
temperature and the set temperature will illuminate. The setting range is
between -16°C to -24°C (non-periodic temperature regulation); it will exit
seconds after finishing the setting, press A key or B key to confirm the
setting state manually and make the setting valid.)
To Next Page
Loading...