13
Note: when there is a failure, the system will display all failures' codes in
turn.
The warning will be automatically canceled or be canceled by pressing any
key. When failure happens, it is a priority to show failure code till failure
recovery, otherwise the set temperature and quick-frozen icon cannot be
displayed. If a failure has been displayed all the time and automatic recovery
fails, contact After-sale Department or professional maintenance personnel.
10. Force defrosting
Press and hold "temperature regulation" keys ∧ and ∨ for three seconds to
enter into Force Defrosting Mode and the display always shows "3". When
entering into Force Defrosting Mode, the compressor and fan will stop
immediately. When defrosting heater is forced to be started and under Force
Defrosting Mode, press and hold "temperature regulation" keys ∧ and ∨ for
three seconds to exit from the Force Defrosting Mode.
Do not arbitrarily dismantle or
repair. Choose the repair
shops designated by the
manufacturer to replace the
accessories.
In order to avoid
fire, do not use
combustible
solvents nearby
the freezer.
Use standard professional
three-hole power socket
(above 10A). Socket
grounding must be good.
In order to avoid, fire and other
accidents, do not put anything
combustible, explosive, volatile and
strongly corrosive into the freezer. In
order to avoid freezing, rupture and
other losses, do not put the bottles
with fluids or sealing containers into
the refrigerating box.
Matters needing attention
Pe
s
tic
ide
Cos
meti cs
Am
yl
a
c
ce
ta
t
e
Bi
nde r
Alcoh ol
To Next Page
Loading...
