SSTART-UP
After the bread maker is connected to the power supply, a beep will be heard and
“3:00”
appears on the display after a short time. The arrow shows the default settings of
800g and MEDIUM.
START/STOP
Press the START/STOP button to start or stop the selected programs.
To start a program, press the START/STOP button once. A short beep will be heard
and the two dots on the display will begin to flash.
All other buttons are inactivate except the START/STOP
button after a program has begun. This feature will help to prevent any
unintentional disruption to the operation of program.
To stop the program, press the START/STOP button for approx. 2 seconds, then a
beep will be heard.
PAUSE function
After the program has started up, you can press the START/STOP button to pause
the program. The setting will be memorized and the working time will flash on the
display.
Press the START/STOP button again to continue the program. The program will
automatically start again in 10 minutes if no button is pressed.
Program menus
For setting different programs. Each time it is pressed (accompanied by a short
beep), the 12 different program menus will appear in turns on the display . Select
your desired program. The functions of the 12 program menus are as follows:
Program 1: BASIC
For white and mixed breads, it mainly consists of wheat flour or rye flour. The bread
has a compact consistency. You can adjust the browning level by setting the TEMP
button.
Program 2: FREN CH
For light breads made from fine flour. French bread requires special timing and
temperatures to achieve that wonderful crispy, nicely browned crust. This is not
suitable for baking recipes requiring butter, margarine or milk.
Pro
ram 3: W HOLEWHEAT
GB
7
To Next Page
Loading...