7
GB
by pressing the switch button.
• Immerse the blade guard completely in the ingredients.
• Blend the ingredients by moving the appliance slowly up and
down and in circles.
• After you have completed blending, Release the switch button,
then unplug from the power outlet.
Warning: The continuous operating time must be less than 60
seconds. Never blend hot oil, fat or meat.
• If your blender gets blocked, first stop and unplug before
clearing.
• After use, unplug and dismantle
• Always switch off and unplug before cleaning. Refer to the
instructions in the “care and cleaning” section.
TO USE THE CHOPPER
• Remove the protective cover from the blade of the chopper.
• Clean the lid, the blade unit and the bowl of the chopper.
• Fix the blade unit in the chopper bowl.
• Put the food into the bowl (not more than the maximum
indicated level).
• Fit the power handle inside the chopper, turn and lock until
you hear a slight click. The marks on the power handle and the
chopper should now be aligned with each other. If this is the
case, the chopper is locked correctly.
• Check that the power cable is not damaged.
• Make sure your electricity supply is the same as the one shown
on the power handle.
• Plug in; hold the power handle steady. Switch the appliance on
by pressing the switch button or the turbo button.
• After you have completed chopping, Release the switch button,
To Next Page
Loading...