BEFORE USING THE WASHING MACHINE
1. Removethe packaging and Inspect
After unpacking, ensure that the washing machine is undamaged. If in doubt, do
not use the washing machine. Contact the After-Sales Service or your local retailer.
Check that the accessories and supplied parts are all included.
Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of
children, as they are potentially dangerous.
2. Remove the transportation bolts
The washing machine is fitted with transportation bolts to avoid any possible
damage to the interior during transportation. Before using the machine, it is
imperative that the transportation bolts are removed.
After their removal, cover the openings with the 4 enclosed plastic caps.
3. Install the washing machine
Move the appliance without lifting it by the worktop.
Install the appliance on a solid and level floor surface, preferably in a corner of
the room.
Ensure that all four feet are stable and resting on the floor and then check that
the washing machine is perfectly level (use a spirit level).
Ensure that the ventilation openings in the base of the washing machine (if
available on your model) are not obstructed by a carpet or other material.
4. Water Inlet
Connect the water supply inlet hose in accordance with the regulations of your
local water company.
Water Inlet - Depending on models
Single Inlet - Cold water only
Water Tap: 3/4 threaded hose connector
6
Dual Inlet - Hot and cold water
To Next Page
Loading...
