3332
is level or down to let the water flow smoothly. Do never let it up.
z
Select the desired humidity setting and fan speed on the unit for pump
draining to start.
Note: The pump operation on light blinks at 1Hz when
the pump is operational failure. Please turn off the unit
and plug the power cord out. Check the following things:
z
Cleaning the filter of the pump.
–
Remove the bucket from the unit, take down the
pump and clean the filter of the pump.
z
Check that the pump drain hose does not link or back.
z
Empty the water of the bucket.
z
Reinstall the pump hose if it drops and reinstall the bucket properly. Turn
on the appliance. If the error repeats, call for service.
Note: Do not use this operation when the outdoor temperature is equal to
or less than 0°C (32°F), otherwise water is become ice that will cause the
water hose blocked up and the unit failure. Make sure to empty the bucket
once a week when using the pump draining feature. When the pump draining
feature is not being used, remove the pump drain hose from the outlet.
z
Press the pump drain hose outlet in and take the pump drain hose out
from it (See Fig.13). Make sure do not let the water in the pump hose drip
to the floor.
1. Press the pump drain hose outlet in
2. Take the pump
drain hose out
Filter of the pump
To Next Page
Loading...