6
OPERATING INSTRUCTIONS
TO STRAIGHTEN HAIR
Hair should be clean and completely dry before using the hair straightener.
For best results, use a light styling product before blow-drying hair.
1. Start with a hair section that is approx. 4 cm wide and no more than 1 cm
thick.
2. Open the hair straightener and place the hair section between the two hot
plates, close to the scalp. Trap hair between the plates by firmly squeezing
the handles together.
3. While maintaining the tension, slowly pull the unit down along the hair
section toward the ends. At the ends, release the pressure on the handle
and allow the hair to slide out.
4. Repeat the process on additional sections of hair until you achieve the
hairstyle you desire. It may be necessary to repeat the process on certain
areas, depending on the texture of your hair. For best results, some
experience is necessary. After using the straightener several times, you
will learn the ideal way to straighten and style your hair.
Remark: For safety reasons, the appliance switches itself o automatically
after 60 minutes. For continued use, the appliance will need to be switched
on again.
PRODUCT OVERVIEW
1. 3D floating plates
2. One button for
on/o and temp. adjust
3. 5 LED indicators
4. 360° Swivel cord
4.
3.
1.
2.
To Next Page
Loading...