15
Starting to use
z
Before initial start, keep the refrigerator still for
two hours before connecting it to power supply.
z
Before putting any fresh or frozen foods, the
refrigerator shall have run for 2-3 hours, or for
above 4 hours in summer when the ambient
temperature is high.
z
Spare enough space for convenient opening of the
doors and drawers or statement by the distributor
Energy saving tips
z
The appliance should be located in the coolest area of the room, away from
heat producing appliances or heating ducts, and out of the direct sunlight.
z
Let hot foods cool to room temperature before placing in the appliance.
Overloading the appliance forces the compressor to run longer. Foods that
freeze too slowly may lose quality, or spoil.
z
Be sure to wrap foods properly, and wipe containers dry before placing
them in the appliance.This cuts down on frost build-up inside the appliance.
z
Appliance storage bin should not be lined with aluminum foil, wax paper,
or paper toweling. Liners interfere with cold air circulation, making the
appliance less efficient.
z
Organize and label food to reduce door openings and extended searches.
Remove as many items as needed at one time, and close the door as soon
as possible.
To Next Page
Loading...
