2120
the screen enters the normal display of the operation. The first time for using
the refrigerator, temperatures of refrigerating chamber, temperature and
freezing chamber should be set at 5° C/-18 °C respectively.
When the error occurs, the display shows the error code in refrigerating
temperature displaying area (see next page); during normal operation, the
display shows the set temperature of the cooling compartment.
Under normal circumstances, if there is no any manual operation on
refrigerator last for 30 seconds, the control panel will lock itself automatically,
and in locked state, the display light will go out after 30 seconds.
Lock
/unlock
In the unlocked state, long press the button for 3 seconds, enter
the locked state. In the locked state, long press the button for 3
seconds, enter the unlocked state. All the following functions must be
operated in the unlocked status.
Mode setting
Press mode button
to select different control mode.
Vacation mode
Press the button to enter the vacation mode. Icon lights up, the
vacation mode will take effect after panel locked.
Press the button or to exit the vacation mode.
Quick REF.mode
Press the button to enter the quick cooling mode. Icon lights up, the
quick cooling mode will take effect after panel locked.
Press the button to exit the Quick cooling mode.
Quick FRZ.mode
Press the button to enter the quick freezing mode. Icon lights up, the
quick freezing mode will take effect after panel locked.
Temperature setting of refrigerating chamber
Press temperature adjusting button of the refrigerating chamber
, the refrigerating temperature displaying will blink. Then press the
button
again to set the temperature, it will have beeps when do
temperature adjustment. Temperature setting range is between 2°C and
8°C. Every time you press the button, the temperature will change 1°C.
After adjusting, the refrigerating temperature will blink for 5 seconds. New
To Next Page
Loading...
