21
temperature setting will take effect after panel locked.
Temperature setting of freezing chamber
Press temperature adjusting button of the freezing chamber , the
freezing temperature displaying will blink. Then press the button
again to set the temperature, it will have beeps when do temperature
adjustment. Temperature setting range is between -16°C and -24°C. Every
time you press the button, the temperature will change 1°C. After adjusting,
the freezing temperature will blink for 5 seconds. New temperature setting
will take effect after panel locked.
Quick-freeze time setting
In quick-freeze mode, long press the
button for 3 seconds, the
refrigerating temperature area will display the existing quick-freeze time, click
the button again to set the quick freeze time, the setting circulates
as "26-48-26-48.".
Ice off
Press the button
, the icon will shine or go out, what means the
switching off/on of ice maker.
Dispenser
Press the button
to enter the ice/water selection condition, the
selection circulation will show as "Fetching ice cubes/Fetching crushed ice/
Fetching water/none", and then the corresponding icon on the panel will shine
successively.
When the refrigerator is running, the working time of the water tank will
be accumulated. After 150 days, the water tank filter cleaning icon will be
displayed. When it reaches 180 days, the water tank filter cleaning icon will
be flashed. This means you need to clean the water tank filter. Long press
the button for 3s to reset the service time of water tank filter. After
water tank filter be cleaned, the icon will extinguish.
Storage upon power failure
In case of power failure, the instant working state will be memorized and
maintained till re-electrification.
Opening warning and alarm control
When the refrigerator chamber door gets open, the warning tone will play. If
the door is not closed in two minutes, the buzzer will sound once every second
until the door is closed.
To Next Page
Loading...
