How to troubleshoot if my Polar Electro Beverage Dispenser is not working?
If your Polar Electro Beverage Dispenser is not working, first ensure it is properly plugged in and switched on. Then, check the power supply. If the plug or lead is damaged, contact a POLAR agent or a qualified technician.
Why is my Polar Electro DB331-A not cooling?
If your Polar Electro Beverage Dispenser is not cooling, the airflow to the condenser might be obstructed. Increase the gap between the appliance and any obstacles or heat sources. If the issue persists, there may be a coolant leak or a failed fan motor, in which case you should contact a POLAR agent or a qualified technician.
What to do if the tap leaks on my Polar Electro DB331-A?
If the Polar Electro Beverage Dispenser tap leaks, the tap piston may not be well lubricated. Try lubricating it. If the issue continues, the tap piston might be defective and require replacement.
What to do if product leaks from the back of the bowl of my Polar Electro DB331-A?
If product leaks from the back of the bowl of your Polar Electro Beverage Dispenser, first check the positioning of the bowl to ensure it is fitted correctly. If the leaking continues, the bowl seal may not be well lubricated, so try lubricating it. If that doesn't solve the problem, the bowl seal might be defective and need to be replaced.
General| Brand | Polar Electro |
|---|---|
| Model | DB331-A |
| Category | Beverage Dispenser |
| Language | English |
Covers safe operation, handling, installation by trained personnel, and user supervision requirements.
Includes warnings about packaging, cord damage, unauthorized modifications, unattended operation, accessory use, periodic testing, and specific risks.
Provides an overview of the manual's purpose and the appliance's intended use for making drinks.
Defines the two types of persons who are permitted to access and operate the appliance.
Lists all items included in the product packaging for the slush machine.
Details essential checks for the installation environment, including location, lighting, and temperature.
Provides guidelines on positioning the unit, maintaining ventilation clearance, and avoiding heat sources.
Guides the user through the physical assembly of components like the drip tray.
Explains the bowl indicator lights and the bowl temperature display.
Details the function of mode selection, slush/juice mode, OFF mode, and increase/decrease buttons.
Describes the on/off switch, light button, and the SET button's restricted access.
Instructions for filling the bowls with product, including preparation and safety warnings.
Covers initial power-up, selecting working modes (Slush/Juice) and adjusting settings.
Details on serving slush/cold drinks, and the procedure for cleaning individual bowls.
Instructions for dispensing product, turning off individual bowls, and emptying bowls.
Details on how to safely turn off individual bowls and the entire appliance.
Comprehensive instructions for cleaning, maintenance, and general care of the appliance.
Step-by-step guide to disassembling the tap for cleaning and maintenance.
Instructions for safely removing the bowl and cleaning all dismantled parts.
Procedures for cleaning the lid and safely re-assembling it with the auger.
Guides the user on applying seals to the auger and lubricating components.
Instructions for performing a rinsing cycle after re-assembly to ensure hygiene.
Lists common faults, their probable causes, and recommended solutions.
Provides detailed technical data including model, voltage, power, capacity, and refrigerant.
Details the wiring connections for the appliance plug and safety earthing requirements.
Information on environmentally safe disposal and compliance with regulatory standards.
Declaration of equipment conformity to territory legislation, council directives, and standards.
Details of signatories, their positions, and addresses for the declaration.
To Next Page
