To Next PageTo Next PageHow to troubleshoot a Polar Refrigeration Merchandiser that is not working?
If your Polar Refrigeration Merchandiser isn't working, first ensure the unit is correctly plugged in and switched on. If that's not the issue, check for any damage to the plug or lead, and replace them if necessary. Also, inspect the fuse in the plug and replace it if it has blown. Finally, verify that there isn't a fault with the mains power supply.
What to do if my Polar Refrigeration Merchandiser displays error code EE4?
If your Polar Refrigeration Merchandiser is showing error code EE4, it could be due to restricted airflow or a blocked condenser. Try to increase airflow around the unit and clean the condenser to resolve the issue.
Why is the temperature too high or low in my Polar Refrigeration Merchandiser?
If your Polar Refrigeration Merchandiser's temperature is too high or low, there might be too much ice on the condenser; defrost the appliance. The condenser could also be blocked with dust, so clean it. Ensure the doors are properly shut and the seals aren't damaged. Check if the appliance is near a heat source or in direct sunlight, and move it if needed. High ambient temperatures can also affect performance, so increase ventilation or move the appliance to a cooler spot. Remove any hot foodstuffs or blockages to the fan, and reduce the amount of food stored if the appliance is overloaded.
Why is my Polar Refrigeration Merchandiser so loud?
If your Polar Refrigeration Merchandiser is unusually loud, check and tighten all nuts and screws. Also, verify that the appliance has been installed in a level and stable position, adjusting if necessary.
What to do if my Polar Refrigeration Merchandiser is leaking water?
If your Polar Refrigeration Merchandiser is leaking water, it might not be properly leveled. Adjust the screw feet to level the appliance.
General| Brand | Polar Refrigeration |
|---|---|
| Model | CD229 |
| Category | Merchandiser |
| Language | English |
