To Next PageTo Next PageWhy is my Polar Refrigeration Refrigerator not working?
Your Polar Refrigeration Refrigerator might not be working due to several reasons: it may not be switched on, so check if it is plugged in and turned on. The fuse in the plug might have blown, in which case you should replace it. Also, check the power supply. For damaged plugs/leads or internal wiring faults, it's best to call a POLAR agent or a qualified technician.
What to do if my Polar Refrigeration G597 Refrigerator temperature is too high or low?
If the temperature in your Polar Refrigeration Refrigerator is too high or too low, there could be several causes. Too much ice on the evaporator requires you to defrost the appliance. A condenser blocked with dust needs cleaning. Make sure the doors are properly shut and the seals aren't damaged. The refrigerator might be near a heat source, so consider moving it. High ambient temperature may also be the reason, so increase ventilation or move the appliance to a cooler spot. Remove any excessively hot foodstuffs or blockages to the fan, and reduce the amount of food stored if the appliance is overloaded.
How to fix a Polar Refrigeration G597 Refrigerator that is not working?
If your Polar Refrigeration refrigerator isn't working, there are several potential causes. First, ensure the unit is correctly plugged in and switched on. Check the fuse in the plug and replace it if it has blown. If the plug and lead are damaged or if there's an internal wiring fault, you should call a POLAR agent or qualified Technician. Also, verify the power supply is working.
Why is my Polar Refrigeration G597 Refrigerator temperature too high or low?
If your Polar Refrigeration refrigerator's temperature is too high or low, several factors could be responsible. Too much ice on the evaporator might be the problem—try defrosting the appliance. Make sure the doors are shut properly and that the seals aren't damaged. The appliance might be overloaded, so reduce the amount of food stored inside. Remove any excessively hot foodstuffs or blockages to the fan. Ensure the refrigerator is not near a heat source and that airflow to the condenser isn't interrupted; move it to a more suitable location if needed. If the ambient temperature is too high, increase ventilation or move the appliance to a cooler spot.
How to fix a leaking Polar Refrigeration G597 Refrigerator?
If your Polar Refrigeration Refrigerator is leaking water, it might not be properly leveled; adjust the screw feet if applicable. The discharge outlet could be blocked, so clear it. Obstructions to water movement to the drain should be removed. If the water container is damaged or the drip tray is overflowing, call a POLAR agent or qualified technician, or empty the drip tray if applicable.
Why is my Polar Refrigeration G597 so loud?
Your Polar Refrigeration Refrigerator might be unusually loud because the safety band hasn't been removed, so remove it. Loose nuts or screws can also cause noise; check and tighten them. Additionally, the appliance may not be installed on a level or stable surface, so check the installation position and adjust if necessary.
What to do if my Polar Refrigeration Refrigerator is leaking water?
If your Polar Refrigeration refrigerator is leaking water, several things could be the cause. Make sure the appliance is properly leveled by adjusting the screw feet, if applicable. Check if the discharge outlet is blocked and clear it. Also, ensure that the movement of water to the drain is not obstructed by clearing the floor of the appliance, if applicable. Empty the drip tray if it's full. If the water container is damaged, you should call a POLAR agent or qualified Technician.
How to reduce noise from a loud Polar Refrigeration G597 Refrigerator?
If your Polar Refrigeration refrigerator is unusually loud, start by checking and tightening all nuts and screws, as a loose nut or screw could be the cause. Also, verify the installation position. If the appliance hasn't been installed in a level or stable position, change it if necessary.
What does Error Message HtA mean on my Polar Refrigeration Refrigerator?
Error Message HtA on your Polar Refrigeration refrigerator indicates that the inner temperature exceeds the set maximum temperature. Check the Troubleshooting Guide; if the problem persists, call a POLAR agent or qualified Technician.
What does Error Message LtA mean on my Polar Refrigeration Refrigerator?
Error Message LtA on your Polar Refrigeration refrigerator means that the inner temperature exceeds the set minimum temperature. Check the Troubleshooting Guide; if the problem persists, call a POLAR agent or qualified Technician.
Covers safe positioning, installation, cleaning, and electrical safety guidelines.
Instructions for installing shelf guides, shelves, and floor guards correctly.
Guidelines for optimal food storage, including temperature and covering.
Procedure for powering on the appliance, including socket and switch.
Explanation of the appliance's control panel and its display functions.
Steps to unlock the control panel and enter the parameter menu.
Procedure for changing parameter values using UP, DOWN, and SET buttons.
Detailed descriptions and ranges for various operational parameters.
Instructions for initiating a manual defrost cycle using the DEFROST button.
Guidelines for cleaning the appliance interior, door seals, and general maintenance.
Importance and recommendation for periodic cleaning of the condenser.
Table detailing common faults, probable causes, and recommended actions.
Explanation of error messages displayed and their corresponding causes/responses.
Detailed specifications including model, voltage, power, dimensions, and weight.
Information on appliance wiring, plug connection, and earthing requirements.
Guidelines for proper disposal of the appliance according to EU regulations.
General| Refrigerant | Unknown |
|---|---|
| Material | Stainless Steel |
| Door Type | Hinged |
| Type | Under Counter |
| Energy Rating | C |
| Color | Stainless Steel |
