EasyManua.ls Logo

Polar Refrigeration GL192 - User Manual

Polar Refrigeration GL192
56 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Model • Modèle • Modell • Modello • Modelo • Malli:
T316 / GL192
NL
IJsblokjesmachine
Handleiding
9
IT
Fabbricatore di ghiaccio
Manuale di istruzioni
30
FR
Machine à glaçons
Mode d'emploi
16
ES
Máquina de Hielo
Manual de instrucciones
37
DE
Eismaschine
Bedienungsanleitung
23
PT
Máquina de fazer gelo
Manual de instruções
44
Ice Maker
Instruction manual
T316_GL192_ML_A5_v6_20190814.indb 1 2019/8/14 15:40

Questions and Answers

  • R
    Richard SmithAug 5, 2025
    How to fix a Polar Refrigeration Ice Maker that is not working?
    • B
      bowmandanaAug 5, 2025
      If your Polar Refrigeration Ice Maker is not working, first ensure it is correctly plugged in and switched on. Check the power supply. If the plug fuse has blown, replace it. If the ambient temperature is below 10°C, move the appliance to a warmer location. Also, verify that the water supply is on and the supply hoses are not blocked. For damaged plugs/leads or internal wiring faults, contact a POLAR agent or qualified technician.
  • D
    Daniel SmallNov 17, 2025
    Why is my Polar Refrigeration Ice Maker noisy or working intermittently?
    • H
      Hannah GlennNov 17, 2025
      If your Polar Refrigeration Ice Maker is noisy or works intermittently, try the following: * If there are power fluctuations, turn off the ice maker and restart it after 3 minutes. * If the water is not connected, connect the ice maker to the water supply. * If the water filter is blocked, clean it and restart the ice maker. * If the ice bin is full, empty it. * If the room temperature is too low, move the appliance to a warmer position. * If the water box is blocked, disconnect the power, remove some ice cubes, gently tilt the water box by hand, and restart the ice maker after 3 minutes. * If the water tray is not in the proper position, remove any ice blockage. For low water pressure (it should be between 101,352.97 Pa - 806,686.92 Pa (14.7-117 psi)), call a plumber to c...

Summary

Safety Tips

Introduction

Pack Contents

Installation

Installing the Cold Water Feed

Instructions detailing the connection of the water supply to the ice maker for correct flow.

Operation

Making Ice

Details on operating the ice maker, including initial use and cycle completion.

Cleaning, Care & Maintenance

Automatic Cleaning Function

Troubleshooting

Technical Specifications

Electrical Wiring

Disposal

Compliance

Polar Refrigeration GL192 Specifications

General IconGeneral
BrandPolar Refrigeration
ModelGL192
CategoryIce Maker
LanguageEnglish

Related product manuals