Need help?Do you have a question about the Polargos EASY WAY PACK 201 and is the answer not in the manual?
Adherence to manual, user capabilities, child safety, visual monitoring.
Handling, storage, and hazards of batteries.
Procedures for responsible disposal of electronic waste.
Product adherence to EU directives and standards.
Visual identification of hazardous areas within the gate system.
Using photocells for obstacle detection to prevent impact.
Maintaining spacing in shearing zones to protect hands.
Employing obstacle detection systems for impact prevention.
Ensuring adequate space to prevent entrapment between gate elements.
Maintaining specific clearances for the lower part of gate wings.
Detailed specifications including voltage, power, temperature, and protection class.
Guidelines for setting and ensuring consistent gate opening angles.
Physical measurements of the automated gate components.
Function of the integrated limiter for controlling gate opening extent.
Verifying gate condition, post suitability, and desired opening angles.
Guidelines for routing cables and preparing connections for the gate drive.
Requirements for connecting the system to a 230V power source.
Installation using M8x85 carriage bolts for specific post dimensions.
Installation using M8x120 carriage bolts for specific post dimensions.
Steps for preparing the gate wings and establishing drive locations.
Overview of steps including board placement and connections.
Positioning the distribution board on the post.
Steps for installing the main control unit.
Determining the correct mounting position for the module.
Inserting the sealing cord into the control module.
Steps for securely attaching the module to the post.
Connecting the drive units to the system.
Importance and placement of the antenna for optimal reception.
Wiring the drive units (M1, M2) to the distribution box.
Safety procedures for connecting the system to the main power supply.
Overview of initial setup and operational phases.
Decoding indicators and symbols for system status.
Understanding different functions of remote controls.
Two modes of operation: full opening and pedestrian passage.
Procedure for the system to learn the gate's movement path.
Managing power saving and system activation.
Procedures for complete gate movement cycles.
How the system responds to detected obstacles.
Familiarizing users with safe operation and periodic checks.
Functionality for allowing single-wing gate movement.
Programming a remote control button for pedestrian access.
Reversing the pedestrian passage mode activation.
How the gate closes automatically after a set time or photocell detection.
Steps to enable the automatic closing feature.
Overview of Somfy RTS remote control capabilities and types.
Methods for configuring two-button remote controls.
Methods for configuring four-button remote controls.
Operation of remote controls with three buttons.
Procedure for pairing new remote controls with the system.
Function of photocells in stopping or changing gate direction.
Guidelines for positioning photocells for optimal installation.
Connecting and verifying photocell functionality.
Connecting and functioning of an optional orange warning light.
Role and specifications of the optional spare battery.
Replacing the wired antenna with an independent unit for better range.
Connecting a video intercom system to the gate.
Integrating a key switch for gate control.
Functionality and connection of optional zone lighting.
Considerations for powering the system using solar energy.
Where to find help for defects or questions.
Step-by-step guide for changing remote control batteries.
Scenarios and procedures for clearing system settings.
Procedure to manually move the gate in case of malfunction.
Securing the drive mandrel after unlocking.
Troubleshooting steps for drives not reacting or limited range.
Interpreting flashing light codes for system errors.
Addressing issues where the gate reopens after closing.
Overview of mobile-controlled operations like opening and lighting.
List of devices compatible with the RTS application.
Components included in the smart gate package.
Performing initial gate automation setup.
Linking the smart gate control to home network and power.
Initial connection and status check of the Connexoon unit.
Setting up regional and language preferences.
Navigating the interface to initiate device activation.
Providing the individual code for the Connexoon controller.
Selecting the appropriate Connexoon type from the options.
Setting up login credentials and personal information.
Reviewing activation details before finalization.
Finalizing the Connexoon controller activation process.
Completing activation via email link.
Guides for obtaining the application from app stores.
Inputting credentials after application download.
Setting up a unique identifier for tracking activities.
Agreeing to terms and conditions for using the application.
Accessing configuration help and component naming.
Verifying device connection and functionality.
Selecting specific equipment for configuration.
Customizing device names for easier identification.
Finalizing changes by saving the configuration.
Navigating the app to control gates, lighting, etc.
Understanding available modes like "Returning" and "Leaving".
Customizing the "open all" and "close all" functions.
Selecting devices and confirming actions for modes.
Customizing the "Leaving" mode for gate and lighting actions.
Setting delays for actions performed after leaving.
Customizing the "Returning" mode based on distance and time.
Setting the proximity for automatic device activation.
Navigating menus for system configuration and management.
Accessing deeper configuration options via the "configuration" menu.
Enabling location services for weather and home automation.
Controlling the display of weather data on the home page.
Managing email and push notifications for system alerts.
Recording fitter or customer service details for direct contact.
Accessing Somfy customer support contact information.
Adding new devices to the Connexoon application.
Managing device names and identifiers.
Handling the security credentials for the system.
Navigating to the settings for device management.
Initiating the process to rename a device.
Modifying the displayed name of a product.
Checking and stopping device identification process.
Confirming and storing the updated product name.
Accessing the main application menu.
Navigating to the device registration section.
Initiating the process to add a new RTS device.
Choosing the product category (e.g., RTS Equipment) to add.
Identifying the specific model of RTS equipment.
Acknowledging safety requirements for automated systems.
Initiating product activation and confirmation sequence.
Verifying correct registration via a test function.
Handling outcomes of the test and troubleshooting steps.
Assigning a name to the newly added gate.
Confirmation that the gate is now visible in the application.
Identifying the specific gate actuator to be deleted.
Verifying that the removed product no longer responds.
Initiating the deletion process for an RTS product.
Confirming deletion based on product response.
Final verification that the product has been successfully removed.
Completing the deletion process.
Functions of the controller's connection interfaces.
Interpreting the meaning of the controller's LED status lights.
Steps for starting and checking the online connection.
General| Brand | Polargos |
|---|---|
| Model | EASY WAY PACK 201 |
| Category | Garage Door Opener |
| Language | English |
To Next Page