Need help?Do you have a question about the Polargos EASY WAY201 and is the answer not in the manual?
General| Brand | Polargos |
|---|---|
| Model | EASY WAY201 |
| Category | Gate Opener |
| Language | English |
Specifications of the EASY WAY 201 drive unit.
Details on gate leaf size, weight, and opening angle.
Physical dimensions of the drive unit and its opening limiter.
Pre-installation checks for gate and posts.
List of tools required for assembly.
Diagram and explanation of the basic wiring setup.
How to prepare and attach connectors to posts.
Preparing the gate and positioning the drive unit.
Securing connectors to the gate and post.
Installing the drive unit onto connectors and locking it.
Assembling the yoke and attaching it to the gate leaf.
Location and mounting of the electrical box on the post.
Connecting the drive unit motors to the electrical box.
Connecting the antenna and mains/solar power supply.
Defines indicator lights and button press types.
Programming, managing, and switching remote control modes.
Calibrating the gate's opening and closing path.
Configuring automatic closing and switching modes.
Using the gate in sequential mode (complete/pedestrian opening).
Using the gate in automatic mode with timed closing.
How to operate the gate with 3-button remote controls.
Gate lighting, remote battery replacement, and manual motor control.
Diagnosing issues when the ON/OFF indicator is off.
Troubleshooting photocell failure indicated by DANGER light.
Diagnosing slow flashing ON/OFF indicator for power or load issues.
Troubleshooting servomotor overheating or short circuits.
Correcting servomotor activation and direction issues.
Addressing issues with limited remote control range.
Fixing gates that reopen after closing.
Troubleshooting automatic closing after opening.
Description and wiring of photocell safety sensors.
Details on emergency battery and orange zone lighting.
Key switch and intercom system descriptions.
Code panel, wireless switch, and remote control descriptions.
Description and connection of the external antenna.
How to connect the drive unit to a solar power system.
To Next Page
