EasyManuals Logo

Polaris 800 RMK 2011 User Manual

Polaris 800 RMK 2011
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #96 background imageLoading...
Page #96 background image
92
MAINTENANCE
Clutch System
Drive Belt Deflection
Measure belt deflection with both
clutches at rest and in their full
neutral position.
Place a straight edge (1) on the
belt and apply downward pressure
while measuring at point 2. This
measurement should be 1 1/4
inches (3.2 cm).
Drive Belt Adjustment
1. Loosen the 7/16-inch jam nut on the belt width adjuster.
2. Using a 1/8-inch Allen wrench, turn the set screw inward (clock-
wise) to increase the distance between the sheaves or outward
(counter-clockwise) to decrease the distance.
3. Tighten the jam nut.
1
2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 800 RMK 2011 and is the answer not in the manual?

Polaris 800 RMK 2011 Specifications

General IconGeneral
Engine TypeLiberty
Displacement795 cc
Track Length155 in
Track Width15 in
Track Height2.4 in
Fuel Capacity11.5 gal
Bore x Stroke85 mm x 70 mm
StarterElectric
Drive ClutchP-85
Driven ClutchTeam LWT
Height48 in
Front Travel9 in
Rear Travel16 in
Ski TypeGripper
CarburetionMikuni

Related product manuals