Polaris 800 RMK 2011 User Manual

42
THE PERFECT FIT
Suspension Adjustments
Factory settings, combined with user adjustments to the rear track shock
spring (RTSS), should be all that’s necessary to provide the best riding
experience for most riders. The primary adjustment for overall vehicle
balance is RTSS preload. Perform this adjustment first.
NOTICE: Never adjust spring preload to an installed length longer than the
maximum or shorter than the minimum lengths in the following chart.
Damage to the suspension could result.
Spring Type Maximum
Installed Length
Minimum Installed
Length
RMK Factory Spring 10 3/4" (27.3 cm) 9 5/8" (24.5 cm)
PRO-RMK Factory Spring 11" (28 cm) 9 3/4" (24.8 cm)
ASSAULT RMK Factory Spring 11" (28 cm) 9 3/8" (23.8 cm)
250# Optional Heavy Spring 10 7/8" (27.6 cm) 9 7/8" (25 cm)
Installed Length
Measurement

Polaris 800 RMK 2011 Specifications

General

Engine Type	Liberty
Displacement	795 cc
Track Length	155 in
Track Width	15 in
Track Height	2.4 in
Fuel Capacity	11.5 gal
Bore x Stroke	85 mm x 70 mm
Starter	Electric
Drive Clutch	P-85
Driven Clutch	Team LWT
Height	48 in
Front Travel	9 in
Rear Travel	16 in
Ski Type	Gripper
Carburetion	Mikuni